My Brother toner is too small.

For most Brother laser printers, the toner and drum are both required for the printer to work. When you receive a toner from Ink Station, the part does not come with the drum. You will need to separate the empty toner away from the drum to install the new toner.

Push down the lock leaver on the drum (1) and take the toner cartridge out of the drum (2).

Once you have removed the empty toner you can replace it with the new one you received from Ink Station. 

• Related Articles

• The "replace toner" message on my Brother printer will not go away after installing a new toner?

  For some Brother printers, the error messages such as "Replace Toner" or "Prepare Toner" will continue to appear if the toner is not reset after putting it in the printer. Each Brother printer have different set of instructions so please contact ...

• My new toner cartridge is not printing properly.

  If you're having print quality issues with a toner, please try the following to see if the quality improves Gently shake the cartridge side to side so the toner is evenly distributed. We recommend doing this over a sink or some newspaper as some ...

• The "replace drum" message will not go away on my Brother printer after installing a new drum.

  For some Brother printers, the error messages such as "Replace Parts Drum" or "Drum End Soon" will continue to appear if the drum count is not reset when you replace the drum unit.  Each Brother printer have different set of instructions so please ...

• Should I pull out the plastic strip in my toner?

  Most of the time, these plastic strips are there to prevent leakage during transit. They run the length of the toner and will need to be removed so the toner can come out during printing. There should be an instruction leaflet enclosed with the ...

• I've installed my new toner and the pages are coming out all one colour.

  When pages are coming out one colour after installing a new toner then it's possible that something is wrong with the chip's connection to the printer. Please try this simple reset to see if you can get it to work. 1. Remove the toner from the ...