The "replace drum" message will not go away on my Brother printer after installing a new drum.

• Related Articles

• The "replace toner" message on my Brother printer will not go away after installing a new toner?

  For some Brother printers, the error messages such as "Replace Toner" or "Prepare Toner" will continue to appear if the toner is not reset after putting it in the printer. Each Brother printer have different set of instructions so please contact ...

• My Brother toner is too small.

  For most Brother laser printers, the toner and drum are both required for the printer to work. When you receive a toner from Ink Station, the part does not come with the drum. You will need to separate the empty toner away from the drum to install ...

• My cartridge is still reading low or empty after installing a new cartridge.

  Genuine For all genuine cartridges that do not have the correct ink levels, please contact your printer's manufacturer to troubleshoot. Compatible Ink Station cartridges are manufactured by a combination or new and re-manufactured parts. Cartridges ...

• My new toner cartridge is not printing properly.

  If you're having print quality issues with a toner, please try the following to see if the quality improves Gently shake the cartridge side to side so the toner is evenly distributed. We recommend doing this over a sink or some newspaper as some ...

• I've installed my new toner and the pages are coming out all one colour.

  When pages are coming out one colour after installing a new toner then it's possible that something is wrong with the chip's connection to the printer. Please try this simple reset to see if you can get it to work. 1. Remove the toner from the ...